Высокочастотная плата Rogers RT5870
Название продукта: Высокочастотная плата Rogers RT5870
Тип продукта: Высокочастотная плата Rogers RT/duroid 5870
Материал: Rogers RT/duroid 5870.
Количество слоев/толщина пластины: 2 слоя/0,9 мм.
Ширина линии/межстрочный интервал: 0,762 мм
Области применения: коммерческие аэрокосмические широкополосные антенны, микрополосковые линии и полосковые цепи, оборудование миллиметровых волн, радиолокационные системы, системы наведения ракет, двухточечные цифровые радиочастотные антенны.
Высокочастотная плата Rogers RT5870
Название: Высокочастотная плата Rogers RT5870
Материал: Роджерс RT5870.
Слой: 2л
ДК: 2.33
Толщина диэлектрика: 0,762 мм
Теплопроводность: 0,69 Вт/м.к.
Объемное сопротивление: 1,2*1010
Поверхностное сопротивление: 5,7*109
Готовая толщина: 0,85 мм
Обработка поверхности: Иммерсионное золото
Применение: печатные платы для коммерческой авионики, микрополосковые и полосковые печатные платы, печатные платы для миллиметровых волн, ракеты.
Имя: печатная плата Роджерс 4003
Материал: материал Роджерс 4003.
диэлектрическая проницаемость Роджерса 4003: 3,38
Слой: 4003+4450Ф
Толщина роджерса 4003: 0,508 мм (20 мил)
Готовая толщина: 2,0 мм
Подложка Rogers 4003. Толщина меди: 17 мкм.
Толщина готовой меди: 1 унция
Обработка поверхности: Иммерсионное золото
Цвет: зеленый/белый
Минимальная трассировка/пространство: 6 мил/6 мил
Особенности: печатная плата Rogers, печатная плата tg280, устойчивая к высоким температурам.
Высокочастотная гибридная печатная плата СВЧ-печати
Название: Высокочастотная микроволновая гибридная пластина печатной платы
Слои: 6 слоев
Толщина пластины: 1,6±0,14 мм
Используемая пластина: Rogers4350B+FR4 Shengyi
Диэлектрическая проницаемость: 2,2±0,02
Коэффициент диэлектрических потерь: 0,0009
Z маленькая апертура: 0,3 мм
Обработка поверхности: Иммерсионное золото ENIG
Ширина/интервал Z-линии: 0,2 мм/0,3 мм
Особенности процесса: специальные материалы, смешанное ламинирование Rogers4350B+FR4 Shengyi.
Название: Печатная плата Роджерса (PCB)
Материал: материал печатной платы Роджерса
Стандарт качества: IPCB6012 Класс 2 или Класс 3.
Диэлектрическая проницаемость материала печатной платы Роджерса: 2,2–16.
текстура материала: керамическая печатная плата Роджерса
Слои: 1 слой – многослойная гибридная печатная плата.
Толщина: 0,1–12 мм
Толщина меди: 0,5-3 унции
Технология поверхности: Серебро, Золото, OSP
Применение: Высокочастотная печатная плата микроволновой печи Rogers
Высокочастотная печатная плата Rogers RO4003C
Название: Высокочастотная печатная плата Rogers RO4003C
Темнота: 3,38±0,04
Слои: 2 слоя
Толщина диэлектрика: 0,508 мм (20 мил)
Готовая толщина: 0,6 мм
Материал Медь Толщина: ½ (17 мкм)
Толщина готовой меди: 1 унция (35 мкм)
Обработка поверхности: Иммерсионное серебро.
Применение: коммуникационная инфраструктура, компьютеры, аэрокосмическая промышленность.
- PCB Capability
- PCB manufacturing equipment
- PCB Materials
Introducing Rogers PCB, the epitome of high-performance printed circuit boards. Rogers PCBs are crafted using Rogers Corporation’s advanced materials, known for their exceptional electrical properties, thermal stability, and reliability. These PCBs are the preferred choice for applications that demand high-frequency performance, such as RF and microwave circuits.
Our Rogers PCBs are engineered with a specialized laminate that combines a low-loss dielectric material with high thermal conductivity. This unique construction ensures minimal signal loss, excellent signal integrity, and efficient heat dissipation, making them ideal for high-speed and high-power applications.
With their superior electrical characteristics, Rogers PCBs provide reliable performance in complex circuits, such as antennas, amplifiers, and radar systems. Their low loss tangent and controlled impedance enable precise signal transmission, minimizing distortion and maximizing signal quality.
Rogers PCBs are also known for their stability over a wide range of temperatures. This also ensures a consistent performance even in extreme environmental conditions. They exhibit excellent dimensional stability, reducing the risk of warping or delamination during manufacturing or operation.
Advantages:
- High-Frequency Performance: Rogers PCBs excel in high-frequency applications, offering low signal loss and controlled impedance for precise signal transmission.
- Excellent Signal Integrity: These PCBs also ensure minimal distortion, maintaining signal quality and enabling reliable operation of high-speed circuits.
- Efficient Thermal Management: Rogers PCBs have high thermal conductivity, allowing for effective heat dissipation, ensuring the integrity and longevity of components.
- Wide Temperature Range: Rogers PCBs exhibit stability over a broad temperature range, ensuring consistent performance in various environmental conditions.
- Reliable and Durable: These PCBs are known for their reliability and also durability, making them suitable for mission-critical applications that require long-term performance.
| Item | Capability |
| Layer Count | 1-40layers |
| Base Material | KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350B、Rogers4000、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) |
| Board Type | Backplane、HDI、High multi-layer 、blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. |
| Board Thickness | 0.2-5.0mm |
| Copper Thickness | Min. 1/2 OZ, Max. 10 OZ |
| PTH Wall | 25um(1mil) |
| Maximum Board Size | 1100*500mm(43”*19”) |
| Min laser drilling size | 4mil |
| Min. Spacing/Tracing | 2.7mil/2.7mil |
| Solder Mask | Green, Black, Blue, Red, White, Yellow, Purple matte/glossy |
| Surface Treatment | Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead-free 、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP, ENIG+Gold finger, Flash gold(electroplated gold)+Gold finger, Immersion silver+Gold finger, Immersion Tin+Gold finger. |
| Min. Annular Ring | 3mil |
| Aspect ratio | 10:1(HASL Lead-free 、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) |
| Impedance control | ±5ohm(＜50ohm), ±10%(≥50ohm) |
| Other Techniques | Blind/Buried Via |
| Gold Fingers | |
| Press Fit | |
| Via in Pad | |
| Electrical Test |
PCB Drilling machine
PCB pattern plating line
PCB solder mask expose machine
PCB pattern expose machine
Strip film etching line
Solder mask screen silk print machine
Solder mask scrubbing line
PCB Flying Probe Test (FPT)
Fully automatic exposure machine
| Here there’re many laminate material datasheets, they’re useful and helpful for you, please see them: | ||||||||
| SUPPLIER | PCB LAMINATE | TYPE | MATERIAL DATASHEET | TG | TD | DK(1MHZ) | DK(1GHZ) | DK(10GHZ) |
| KB | KB-6160 | FR4 | DOWNLOAD | 135 | 305 | 4.35 | – | – |
| KB-6160A | FR4 | DOWNLOAD | 135 | 305 | 4.35 | – | – | |
| KB-6160C | FR4 | DOWNLOAD | 135 | 314 | 4.7 | – | – | |
| KB-6150 | FR4 | DOWNLOAD | 132 | 305 | 4.6 | – | – | |
| KB-6150C | ||||||||
| KB-6164 | FR4 | DOWNLOAD | 142 | 330 | 4.8 | – | – | |
| KB-6164F | FR4 | DOWNLOAD | 145 | 340 | 4.8 | – | – | |
| KB-6165F | FR4 | DOWNLOAD | 150 | 346 | 4.8 | – | – | |
| KB-6167F | FR4 | DOWNLOAD | 170 | 349 | 4.8 | – | – | |
| SHENGYI | S1141 | FR4 | DOWNLOAD | 135 | 310 | 4.6 | – | – |
| S1141KF | FR4 | DOWNLOAD | 140 | 350 | 4.7 | – | – | |
| S1000 | FR4 | DOWNLOAD | 155 | 335 | 4.9 | – | – | |
| S1170 | FR4 | DOWNLOAD | 170 | 335 | 4.6 | – | – | |
| S1000-2 | FR4 | DOWNLOAD | 170 | 335 | 4.8 | – | – | |
| S1155 | FR4 | DOWNLOAD | 135 | 370 | 4.7 | – | – | |
| ITEQ | IT-158 | FR4 | DOWNLOAD | 150 | 340 | 4.6-4.8 | – | – |
| IT-180 | FR4 | DOWNLOAD | 180 | 350 | 4.5-4.7 | – | – | |
| TUC | TU-768 | FR4 | DOWNLOAD | 180 | 350 | – | 4.3-4.4 | 4.3 |
| TU-872 | Modified Epoxy | DOWNLOAD | 200 | 340 | – | 3.8-4.0 | 3.8 | |
| ROGERS | RO 3003 | Cer/PTFE | DOWNLOAD | – | 500 | – | – | 3 |
| RO 3010 | Cer/PTFE | DOWNLOAD | – | 500 | – | – | 10.2 | |
| RO 4003 | Hydrocarbon/Cer | DOWNLOAD | >280 | 425 | – | – | 3.38 | |
| RO 4350B | Hydrocarbon/Cer | DOWNLOAD | >280 | 390 | – | – | 3.48 | |
| RT/duroid 5880 | PTFE/Glass | DOWNLOAD | – | 500 | – | – | 2.2 | |
| ISOLA | Polyclad 370HR | FR4 | DOWNLOAD | 170 | 340 | 4.8-5.1 | – | – |
| FR406-HR | FR4 | DOWNLOAD | 190 | 325 | 3.91 | 3.86 | 3.81 | |
| FR408-HR | FR4 | DOWNLOAD | 200 | 360 | 3.72 | 3.69 | 3.65 | |
| P96 | Polyimide | DOWNLOAD | 260 | 416 | – | 3.78 | 3.73 | |
| Hitachi | MCL-BE- 67G | Modified Epoxy | DOWNLOAD | 140 | 340 | 4.9 | 4.4 | – |
| MCL-E-679F | FR4 | DOWNLOAD | 170 | 350 | 4.2-4.4 | 4.3-4.5 | – | |
| MCL-LX-67Y | Special Laminate | DOWNLOAD | 185-195 | 325-345 | – | 3.4-3.6 | – | |
| Nelco | N4000-13 | Modified Epoxy | DOWNLOAD | 210-240 | 365 | – | 3.7 | 3.6 |
| N4000-13EP | Modified Epoxy | DOWNLOAD | 210-240 | 350 | – | 3.4 | 3.2 | |
| N4000-13SI | Modified Epoxy | DOWNLOAD | 210-240 | 350 | – | 3.4 | 3.2 | |
| N4000-13EP SI | Modified Epoxy | DOWNLOAD | 210-240 | 350 | – | 3.4 | 3.2 | |
| Taconic | TLX-6 | PTFE | DOWNLOAD | – | – | – | – | 2.65 |
| TLX-7 | PTFE | DOWNLOAD | – | – | – | – | 2.6 | |
| TLX-8 | PTFE | DOWNLOAD | – | – | – | – | 2.55 | |
| TLX-9 | PTFE | DOWNLOAD | – | – | – | – | 2.45 | |
| RF35 | PTFE | DOWNLOAD | <315 | – | 3.5 | – | 3.5 | |
| TLC-27 | PTFE | DOWNLOAD | – | – | – | – | 2.75 | |
| TLC-30 | PTFE | DOWNLOAD | – | – | – | – | 3 | |
| TLC-32 | PTFE | DOWNLOAD | – | – | – | – | 3.2 | |
| Arlon | Arlon 25N | Cer | DOWNLOAD | 260 | – | – | – | 3.38 |
| Arlon 25FR | Cer | DOWNLOAD | 260 | – | – | – | 3.58 | |
| Arlon 33N | Polymide | DOWNLOAD | >250 | 353 | 4 | – | – | |
| Arlon 35N | Polymide | DOWNLOAD | >250 | 363 | 4.2 | – | – | |
| Arlon 85N | Polymide | DOWNLOAD | 250 | 387 | 4.2 | – | – | |
| Stablcor | ST325 | – | DOWNLOAD | Thermal conductivity:75w/m.k(with 1oz copper) | ||||
| ST10 | – | DOWNLOAD | Thermal conductivity:325w/m.k(with 1oz copper) | |||||
| Panasonic | R-1566W | FR4 | DOWNLOAD | 140 | 330 | 4.95 | 4.7 | 4.65 |
| Ventec | VT-901 | Polymide | DOWNLOAD | 250 | 390 | 4.2-4.5 | 4.0-4.3 | – |
| VT-90H | Polymide | DOWNLOAD | 250 | 390 | 4.2-4.5 | 4.0-4.3 | – | |
| Bergquist | ht-04503 | – | DOWNLOAD | Thermal conductivity:2.2w/m.k(with 1oz copper) | ||||
We offer High Hybrid PCBs, High Frequency Rogers PCBs, RF Rogers PCBs, SMT Rogers PCBs, Rogers PCB Prototypes and more.
We use Rogers premium materials and will combine with technical expertise to create high quality PCBs
we provide 24-hour service and support, you will receive a reply to your question within 2 hours and a quotation within 24 hours.
Before the official production of the PCB, we will conduct a free DFM review service and support free Allegro, Altium, Protel, PADS, OBD, Gerber and other formats.
We support Rogers RT5870 High Frequency Board business, Leadsintec is a professional one-stop PCBA serv...
Leadsintec supports Rogers RT5870 High Frequency Board business, we are a professional PCBA one-stop a...
We provide Rogers 4003 PCB services. Leadsintec is your one stop turnkey PCB assembly factory. Looking...
We support PCB high frequency microwave hybrid plate business, Leadsintec is a professional one-stop P...
Leadsintec provides Rogers PCB services. This is a PCBA one-stop assembly factory with senior industry...
We are a professional PCBA one-stop assembly factory, Leadsintec supports Rogers RO4003C High Frequenc...
